-40%
Solar Saddle ~ Solar Blanket Holder for Above Ground Swimming Pools ~ 5 Brackets

Solar Saddle ~ Solar Blanket Holder for Above Ground Swimming Pools ~ 5 Brackets

$ 71.25

Availability: 33 in stock
  • Type: Solar Blanket Holder
  • Model: Solar Saddle
  • All returns accepted: Returns Accepted
  • Condition: New
  • Return shipping will be paid by: Buyer
  • MPN: Does Not Apply
  • Refund will be given as: Money Back
  • Compatible Brand: Does not apply
  • Item Depth: Does not apply
  • Item Height: Does not apply
  • Set Includes: Does not apply
  • Item Length: Does not apply
  • Compatible Model: Does not apply
  • Brand: USA Pool Super Store
  • Item must be returned within: 30 Days
  • Will Work With: Above Ground Swimming Pools
  • Material: Does not apply

    Description

    Solar Saddle ~ Solar Blanket Holder for Above Ground Swimming Pools ~ 5 Brackets
    Item Number: 841000
    Product Features:
    5 Brackets
    Hardware needed for installation
    Quick and easy installation
    Do not use with Intex metal ultra frame or soft sided pools
    Works with both round and oval above ground swimming pools
    Does not include solar cover
    Item Description:
    Store your cover in the Solar Saddle by pulling it off of your pool, sliding it into the cradles, folding it accordion-style. Pull the cover back up and over your pool top to reset your solar cover. This can be done while in the pool or out of it, along the sides.
    The unique cradling system keep your solar cover off of your deck or lawn. Made of five smooth and rounded saddle holders, the saddle is quick to mount to your pool and quick to remove with the breakaway connection.
    When mounting the Solar Saddle, be sure to space the five cradles evenly apart, allowing for 2 1/2'-3' of solar cover overhang on each end. All necessary isntallation hardware is included. Installtion of the Solar Saddle should take approximately 20-30 minutes.
    REQUIRED TOOLS:
    Drill with 1/4" metal drill bit
    Screwdriver
    Small adjustable wrench
    MOUNTING INSTRUCTIONS:
    The Solar Saddle unit comes with 5 saddles, 5 mounting brackets, 10 stainless steel pan head bolts and hex nuts, and five mounting pins to attach the saddles to the brackets.
    Locate where you want to place the saddles.
    Mount the center bracket. Hold the bracket under the top rail, close to the side wall.
    Mark where the 1/4" holes will be drilled by holding the bracket up as a location guide. Two holes are required per bracket.
    Locate where to place the outside saddle brackets.
    Measure around the outside of the pool 10 feet (each way from the center bracket) and place the outside brackets.
    NOTE: If you have a large pool you just fold the solar cover back on top of the outside saddles. This allows the solar saddle to be used with the largest sizes of pools.
    Now mount the last two saddles between the center and outside saddles.
    The holders extend from the side of the pool about 18" and down the edge of the pool about 19"
    Note: Do not use with Intex metal ultra frame pools or soft sided pools
    Note: Solar cover not included